Macma New Zealand
SM 75/30 SPINDLE MOLDER 2HP W/40"SLIDING BEAM
SM 75/30 SPINDLE MOLDER 2HP W/40"SLIDING BEAM
SKU:SM 75/30
Couldn't load pickup availability
Fitting neatly into the gap between the heaviest router table and an industrial sized spindle moulder this machine is ideally suited to small professional workshops. A precision ground cast iron table, a steel base cabinet and a 2hp induction motor are the basic ingredients which make up this fantastic recently upgraded spindle moulder. The height of the spindle, which is a standard 30mm diameter, is controlled by the large hand wheel which can then be locked in position.
A simple belt change selects the correct spindle speed for the tooling. This 4 speed version provides even more versatility:
The cutter hood is cast iron with a dust outlet at the center providing efficient extraction for this machine which can produce a high volume of dust and chips. An extractor with over 500cfm airflow is absolute minimum, However we suggest our 2HP 1500cfm collector as a better option.
The two aluminium fences are adjustable to set the width of the opening, to suit the cutters being used. The outfeed fence can also be stepped out, controlled by a fine pitch thread adjuster, for operations where the complete edge of the workpiece is being removed. Fully adjustable guards are connected to a hinged plate which can quickly be lifted to allow clear access to change the tooling.
SPINDLE MOLDER 2HP W/40"SLIDING BEAM
230Vac 1500W Induction Motor, Spindle Dia 30mm, Spindle Travel 110mm, Spindle Speed 1400 or 4000 or 6000 0r 9000rpm, Main Table 600x400mm, Sliding table 220x1000mm, Table height 870mm, Max tooling dia 163mm, 100mm Dust outlet. (W3-SH3)
