XH SBC420 Sand blasting Cabinet

The SBC 420 sandblast cabinet features dual side doors and a large front door for easy loading and unloading. It has excellent lighting and a very powerful vacuum system. The lower hopper stores the abrasive material for use and reuse and opens easily to allow easy removal of any media.

The SBC420 is always ready when you are. The cabinet can be constantly connected to your air supply and is ready for immediate use when you step on the pedal. Use your new sandblast cabinet to remove scale or heavy rust from automotive parts, clean up rusty tools, etch glass, or any other special application.

The SBC420 incorporates a powerful vacuum system that keeps the work area free of "floating" rust and used glass bead shells. After the glass bead “slams against” the surface to be cleaned, a portion of the bead is "destroyed" and becomes almost weightless. The vacuum system removes the "floating" rust particles and the "used up" glass bead shell while the “good beads’ fall into the hopper below the work surface.

The SBC420 uses a foot pedal to control the speed and flow of abrasives from the air gun. The foot pedal allows the operator to just “hold and point” the gun rather than the need to “pull the trigger” of the sandblast gun which can be very tiresome.

DATA SHEET

Pressure (bar) 3,45 - 8,6 (50 - 125 PSI) 

Length (mm) 900

Width (mm) 1300

Height (mm) 1700

Weight (kg) 125

Inside cabinet size: (LxWxH) 1200 x 600 x 340-570mm

15 cfm/80-125 P.S.I.